1and1 Help Centre Categories

print article

Install/Configure the 1&1 InfoStore Connector

Follow the steps below to install and configure the 1&1 InfoStore Connector for storing your 1&1 Mail Business data.

Prerequisite is that you download and install the 1&1 MXConnector before you begin.

Step 1
Once the MXUpdater has been installed, a light bulb icon should appear on the windows taskbar. Right-click the light bulb icon and select Settings.
Settings
Settings
Step 2
Click the Infostore tab on the MXUpdater window.
Infostore configuration page
Infostore configuration page
Step 3
If you receive a notice that a Microsoft Update is necessary, click the provided link. Download the update and install it. When completed, go to the next step.
If you are not prompted to download an update, skip to step 7.
Software update hyperlink
Software update hyperlink
Step 4
After downloading and installing the Microsoft Update, right-click the light bulb icon and select Quit.
Quit MXUpdater
Quit MXUpdater
Step 5
Restart the MXUpdater application from the Start Menu. Use the search box and type MXUpdater.exe.
Or select Start > All Programs > 1&1 > MXUpdater > OXUpdater.exe
Windows start menu > MXUpdater application
Windows start menu > MXUpdater application
Step 6
The application will launch and the light bulb icon should appear by the clock again. Right-click the light bulb icon select Settings once again. Like before, click the Infostore tab.
Step 7
This time you will see the InfoStore settings. Check the address in the server field: https://mailxchange.1and1.co.uk/infostore

Double-check the rest of the information as it should have been auto-completed for you. Change the Drive Letter if you wish to assign the 1&1 InfoStore another drive letter. If the Restore at startup check box is checked, the program will automatically log you in and assign the same drive letter to the 1&1 InfoStore when the computer starts up.
Infostore configuration: server information

Infostore configuration: server information

Step 8
When you have double-checked all the information, click the Connect button.

Infostore connection start
Infostore connection start
Step 9
If successfully connected, most of the window will grey with only the disconnect button remaining. Click the Save button to save your settings and close the window.

Infostore connection established
Infostore connection established

In My Computer, you should see the 1&1 InfoStore mapped as the drive letter you have chosen.
Infostore mapped to a drive

Infostore mapped to a drive

For additional information, you may want to reference: